HAPCO, INC.
353 Circuit St.
Hanover MA 2339
P: 781-826-8801 • F: 781-826-9544
generalinfo@hapcoweb.com
http://www.hapcoweb.com
Description: Supplies a total System for dielectric insulating compounds used in potting, encapsulating, and coating electronic components. In addition, supplies dispensing equipment for ease of use and faster processing, and provides "know-how" for operators using Hapco's processes. Some key advantages: Fast cure, Low stress on components, Excellent electrical insulation values, Easy to use, Reliable.
Pamela Aronson
Steven Aronson
David Elliott
HEATTEK INC.
662 Armour Road
Oconomowoc WI 53066
800-575-7077 • 262-569-7405
pcaine@heattek.com
http://www.heattek.com
Description: HeatTek manufacturers heat processing, cleaning, dispensing, and conveying equipment for the electric motor, transformer and generator industries. Heat process equipment includes impregnation machines, cure systems for all types of coating, heat treating and bluing furnaces. Cleaning systems for cleaning parts prior to painting and oil removal.
Peter Caine
Larry Camp
Rich Natwora
HEDRICH NORTH AMERICA, LLC
18627 G Northline Drive
Cornelius NC 28031
P: 704-895-9723 • F: 704-895-9724
hedrich@bellsouth.net
http://www.hedrich.com
Description: Vacuum Meter - Mix and Dispensing equipment for preparing and casting of pural component resin systems. Equipment for vacuum encapsulation, potting and impregnation. Mold clamping presses and customized molds for molding insulators, brushings, etc. in the automatic pressure gelation (APG) process. Innovative solutions for mixing, degassing and accurate metering of highly viscous and highly abrasive polymers.
H. Peter Berger
Dr. Matthias Kaufmann
Holger Zimmermann
HELWIG CARBON PRODUCTS, INC.
8900 West Tower Avenue
Milwaukee WI 53224-9008
P: 800-962-4851 • 800-365-3113
info@helwigcarbon.com
http://www.helwigcarbon.com
Description: Manufacture carbon brushes for motors and generators; constant pressure brush holders; HQD (Helwig Quick Disconnect) terminals and mounts; mechanical carbon parts (bearings, seals, etc.)
Jason G. Koenitzer
Jeff D. Koenitzer
John E. Koenitzer
HENKEL LOCTITE CORPORATION
15051 E. Don Julian Road
Industry CA 91746
P: 626-968-6511 • F: 716-372-6864
http://www.loctite.com/electronics
Description: HENKEL LOCTITE's unmatched technology includes HYSOL® epoxy coating powders, molding powders, liquid potting, encapsulating materials, urethanes, and varnishes including one-and two-part epoxies for electrical and electronic filters, automotive applications, sensors, motors, ignition coils and for power distribution applications such as transformers, coils, bus bar and switchgear.
Mike Manegold
Karl Medinger
Lisa Stickley
HF SCHROEDER (W/A) LTD.
32 Wolf Cole Street Ijeshatedo Lagos
NIGERIA
P: 234-1-774-1658 • F: 4-1-288-0764
seye777UK@yahoo.com
Adeseye A. Bamisile
HILEC INC.
11 Railroad Ave.
Arcade NY 14009
P: 585-492-2212 • 800-450-8193
info@hilec.com
http://www.hilec.com
Description: Braided fiberglass sleevings. All NEMA grades from A+ thru C-3. Full range of types; Heat treated; heat treated/saturated; PVC coated; acrylic coated; silicone rubber coated; and silicone extrusion coated. Expandable monofilament sleeving for bundling and protecting lead wires, hoses, etc.
Ronald Dallas
Don Hubert
Bob Pichette
HINES INDUSTRIES, INC.
793 Airport Blvd.
Ann Arbor MI 48108
P: 734-769-2300 • F: 734-996-9192
http://www.hinesindustries.com
Description: Manufactures a complete line of balancing machines employing cradle suspensions, static suspensions, and spindle suspensions capable of balancing parts up to 1,000 pounds to the most demanding tolerances. Equipment features and advanced industrial PC control with large, colorful graphics to prompt the user through the balancing process. Services offered included application development, tooling design, feasibility studies, customized features and configurations, design and manufacture, installation, training, calibration, certification, maintenance and service, spare parts, retrofit, retool, and rebuild.
Gordon Hines
Leonard Salenbien
Erin Taylor
HIPOTRONICS, INC.
Rt 22
Brewster NY 10509
P: 845-279-8091 • F: 845-279-2467
sales@hipotronics.com
http://www.hipotronics.com/pwrprod/index.htm
Brian Searls
HITACHI AUTOMOTIVE PRODUCTS (USA), INC.
955 Warwick Road
Harrodsburg KY 40330
P: 606-734-6590 • F: 606-734-8026
David H. Mullins
HÜBERS GMBH
Bernhard-Otte-Str. 1 Bocholt, 46395
Germany
49 2871-2810 • 49 2871-281 150
h.steinzen@huebers.de
http://www.huebers.de
Description: Vacuum Resin Casting and Impregnation Equipmen
Hanno Steinzen Verfahrenstechnik
HUNTSMAN ADVANCED MATERIALS, (FORMERLY VANTICO, INC.)
281 Fields Lane
Brewster NY 10509
800-222-1906 • 914-785-3474
mangesh_rajadhyaksha@huntsman.com
Description: Vantico Electronics Division - Insulating Polymer Materials Business Segment is the former Performance Polymers Division of Ciba Specialty Chemicals. Vantico has 3000 employees and manufacturing sites in 18 countries. Products include epoxy resins, hardeners, cycloaliphatic epoxy, multifunction epoxy, cynate esters formulated systems for electrical and structural casting and encapsulation.
Robert Kultzow
Mangesh Rajadhyaksha
HM WIRE INTERNATIONAL, INC.
2111 - 46th Street NW
Canton OH 44709
P: 330-491-1116 • F: 330-491-1186
info@litz-wire.com
http://www.litz-wire.com
http://www.hmwire.com
Description: Manufacturer and distributor of high-frequency litz wires and enameled copper wires. Litz wire consists of a number of enameled copper wires (AWG 6 (4.00 mm) to AWG 56 (0.0125 mm)) stranded together. The Litz wire reduces "skin" and "proximity" effects, brings higher efficiency, lower weight and less heat development. Litz-Wire is available in round, rectangular or square cross-sections with AWG range from 4/0 to 56. The temperature classes are up to 220ºC. Litz wire is available in round, rectangular, or square cross-sections. The temperature classes are up to 240ºC. Litz wire is available with or without sheathing (outer insulations). Possible sheathing materials are yarn (silk (artificial or natural), polyamid, cotton, impregnated glass, ceramic, etc.); film/foil (polyester, polyamid, polyimid, PTFE, aramid, samica, etc.); or extrusions (PVC, silicone, polyethylene, Teflon, etc.). Special designs are available by request. Our production is according to domestic and international standards (NEMA, DIN, IEC, UL) and our quality control system fulfill the requirements according to NEMA STANDARD MW1000 or DIN EN ISO9002. Application meets transformers, inverters, cokes, inductive components, electronic gear for halogen lamps, electrical and medical industries, and more. Ultra-fine magnet wire AWG 43 (o.056 mm) to AWG 56 (0.0124 mm). Tolerance based upon NEMA STANDARD MW1000, available in self-bonding. Temperature classes of 155ºC and 180ºC.
Monika Cross
Harold S. Marker
